Roll over image to zoom in
23 cu ft ABS TempLog Premier Stainless Steel Laboratory Refrigerator, Touch Screen – Hydrocarbon (Medical Grade) (Temperature Range: 1°C – 10°C)
$4,924.00
23 cu ft ABS TempLog Premier Stainless Steel Laboratory Refrigerator – Hydrocarbon
Features and Benefits
- 23 Cu. Ft. capacity
- Complies with CDC recommendations
- One swing stainless steel door
- Environmentally friendly, natural hydrocarbon (HC) refrigerant (not containing hydrofluorocarbons) which greatly reduces global-warming potential (GWP) while meeting new EPA/SNAP mandates and UL, ASHRAE compliance guidelines.
- Multi-Point temp mapping via NIST traceable data acquisition, 15 probes in air and 3 probes in sample for 360 minutes with temp readings every 60 seconds
- Microprocessor temperature controller
- Adjustable operating temperature range from 1°C – 10°C
- Touch Screen Temp Display and Alarm Module with battery back-up
- Password Protected Control Panel
- Temp display of simulated sample, .1° Resolution, adjustable to display in Celsius or Fahrenheit
- Active temperature scale bar display
- Resettable 1-point min/max history: Your facility policy may require you to record this refrigerator’s maximum and minimum temperature point within last 24 hours. This feature is supported. You may also Reset (clear the history).
- Electronic QR Code to access Owner’s Manual & technical support contact Information
- Electronic troubleshooting guide
- Digital 24 hour temperature chart
- Built-in Temperature Data Logging
- Temperature data can be downloaded to a USB drive (included) or PC (not included)
- Stores a year’s worth of data
- Get a reading for the past 24 hours on touchscreen display
- Multiple alarms: sensor, power failure, door ajar, low battery
- Remote alarm contacts
- Audible and visual high/low temp alarms with adjustable alarm volume
- Remote alarm contacts
- Alarm validation (audible, visual and remote alarm)
- Alarm mute with ring back
- Interior light
- Three shelves (adjustable in Ѕ’ increments)
- Keyed door lock
- Probe access port (3/8′)
- Stainless steel interior and exterior
- Swivel casters (add 5′ to height)
Technical Specifications
- Interior capacity: 23 u. Ft.
- 115V, 60 Hz, 2.2 Amps, 1/4 HP, BTU/HR 4932
- 4-20mA Output
- UL/C-UL listed
- shipping weight 310 lbs
Dimensions
Exterior
Interior
Warranty Information
- Three year parts and labor warranty, plus an additional two year compressor parts warranty