The horizon 6 routine centrifuge makes it easier than ever to process blood and urine specimens. Its six-tube capacity and small footprint make it ideal for labs and point of care facilities where repeatability is key. Use the simple, two-button interface to program your validated cycles, or set and lock to one of three (3) preset cycles based on recommendations by tube manufacturers and the CLSI. Bright LED lid lighting is off when the centrifuge is ready to load, on when running, and flashing at the end of cycle.
Easy to use: Use the simple, two-button interface to select a preset, or program and record your validated settings on the included label. Process 75-100 mm (3-10 mL) tubes in the same holder without cushions.
Easy to monitor: Process samples more efficiently with HORIZON’s LED lid lighting: off when the centrifuge is ready to load, on when running, and flashing at the end of cycle.
Built to last: No routine maintenance. Brushless motor, engineered composite components.
Engineered for safety: Protect your lab with imbalance detection and a shatterproof lid which can only be opened when the rotor is stopped, even if the unit loses power.
A great value: Unbeatable quality for any budget. Each horizon centrifuge is ready to run with horizontal rotor, universal tube holders
Features and Benefits
- 3 cycles preset for routine lab needs
- Set and lock controls to one setting
- LED lid lighting indicates cycle status
- Designed, built, and supported in the USA
- Capacity: Up to six (6) tubes
- Tube sizes: Up to 75-100 mm (3-10 mL)
- Factory presets: Three (3) easily selectable preset cycles (default or custom) based on CLSI guidelines and tube manufacturer IFU
- Set and lock controls: The two-button interface allows users to select a cycle, or lock to a single cycle with the press of a button
- Intuitive lid lighting: No more forgotten samples! Lid lights flash at the end of each cycle and continue flashing until the lid is opened
- Automatic lid lock: Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- 2-Stage horizontal rotor: Drucker Diagnostics’ patented swing-out rotor design produces ideal horizontally separated samples
- Cool operation: Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Brushless DC motor: Years of operation with no routine maintenance
- Clear shatter proof lid: Allows for safe sample observation and optical calibrations
- Reinforced guard bowl: Provides maximum safety and durability
- Quiet operation: Enjoy a sound level of just 64 dBA
- Regulatory approvals: Certified to US, Canadian, and European Safety regulations and standards
Technical Specifications
- Sound Level: 64 dBA
- Dimensions
- Height: 9′ (23 cm)
- Width: 12′ (30 cm)
- Depth: 14′ (36 cm)
- Weight: 12 lbs. (5.4 kg)
- Sound level: 64 dBA
- Max. acceleration time: 20 Seconds
- Max. deceleration time: 20 Seconds
- Factory setting range: 1 to 30 Minutes (± 1%)
- Voltage: 95 to 253 VAC
- Frequency: 50/60 Hz
- Max. power requirements: 220 Watts
- Centrifuge motor: 1/2 H.P. Brushless DC
- Max speed: 3,800 RPM
- Preset Speeds:
- 3,600 RPM with chemistry preset cycle
- 3,300 RPM with Coag: PPP preset cycle
- 1,900 RPM with urine preset cycle
- Capacity: 6 x 75-100 mm (3-10 mL)
Warranty Information
- 1-year warranty
